No one can resist the beauty of the shiplap ceiling. Offering a bit of texture and pattern, this indoor element is just right for every corner of your home.
Remodeling with this type of ceiling is probably not that easy, especially if you decide to do the project yourself.
However, it should be a very rewarding project since the amazing transformation a shiplap ceiling can offer when done right.
Without further ado, let us discuss how to make the most of this beautiful ceiling below.
What to Prepare for the Project Shiplap Ceiling
Start with preparing everything you will need for the project. Gathering a bunch of planks is the most basic need for tackling the shiplap porch ceiling and alike.
Glue and nails are other things you need to prepare. Consider buying more so that you have some spare when nothing goes right.
Do not forget to take a jigsaw, measuring tape, and chalk lines too. Stud finder or common hammer will be much help for this project as well.
To make sure of your safety, get safety glasses, and other security equipment. Then, you need step stools or two ladders to install the shiplap ceiling.
Know the Difference between Shiplap Ceiling and Other Paneling Styles
Tongue and groove ceiling is often considered similar to shiplap due to their look. However, these two have some noticeable differences if you look closely at the paneling styles.
The edges of planks cut for these two paneling styles are dissimilar. While the shiplap ceiling will have a little L-shaped nick flowing down its right-down length, the other does not come with such qualities.
When installing shiplap planks, their notches will fit together resembling small steps. As a result, they are not much overlap.
Most of the time, shiplap planks acquire a gentle bevel along the edges, offering a little valley appearance between them.
Moreover, shiplap boards for ceiling are less painful for DIY installation compared to tongue and groove paneling.
Different from shiplap, installing tongue and groove desired more accurate nailing for secure outcomes.
Meanwhile, the nailing shiplap ceiling only requires you to go with the notches on adjoining boards and then hammer the secure straight through the overlap.
Step by Step for Installing Shiplap Ceiling
First, you need to determine how many shiplap planks are needed and what material to use for the project.
Most shiplap planks are wood, but you can also find them made of different materials. From the common boards to MDF, your options are limitless.
Using cheap pine planks can be a good option if you want to paint the finished paneling. For a tighter budget, consider using plywood for your shiplap wood ceiling.
However, if you do not plan to paint the paneling, a more appealing kind of wood like cedar should be a better choice.
In addition to the common wooden boards, a shiplap ceiling also be made of vinyl, fiber cement, and even metal. Nevertheless, these materials are more common for exterior siding instead of decorative indoor use.
Figure out How Many Planks Needed
Determine how much you need by measuring the width and length of your room in feet. After that, divide the board size into the measurement.
For example, if your white shiplap ceiling is supposed to be 170 inches while the board size is around 9 inches, you will get 48.57 as the result.
This means you need 49 rows of boards. Additional items for trimming are probably needed when installing the ceiling later.
If you think of creating a staggered shiplap design, consider multiplying your room’s span times the number of rows divided by the boards’ length.
Mark the Rafters
After preparing all the materials needed, you have to find your rafters. This way, the boards will hold perfectly and can run parallel. At this stage, furring out the ceiling in advance is somehow needed too.
Then, to find the rafters, you can simply use a stud finder or traditionally measure off 1.3 ft to the next one.
It is recommended to hammer in a test nail first on every end of your rafter. Then, run a chalk line from one secure to another.
Install the Boards
The next step on how to install shiplap on ceiling is to place the boards. Do not forget to measure and cut them carefully when proceed.
In case you want to stagger the boards, keep in mind to begin and stop the board on a furring strip or rafter.
To make sure the identical square or distance, you better measure both ends of your room from side to side. Otherwise, consider correcting any issue on installing the shiplap ceiling with expansion gaps.
Once you are ready to install your shiplap kitchen ceiling, run a few strands of glue entirely on the boards of each side.
If you find any ceiling light or other obstacles, simply cut around and keep working across the room. After the planks are all placed, remember to fill the nail holes too.
Paint the Shiplap
Now, it is time to paint your shiplap ceiling tiles. Make sure to find the best products to help create a balanced look throughout the home.
After painting the boards, you should trim out the room for a better finish and conceal the expansion gaps, if any.
Then, paint again once you finished with the trimming process. Consider painting the trim in different colors for a little of a pop.
Meanwhile, if you are installing shiplap over drywall, begin with planks on completed ceilings. For tongue and groove boards, try to install 1×2 battens. Then, fasten them straightly to the framing for a firmer nailing surface.
Finally, yet importantly, you can hang some light fixtures and see how worthy every second of your time to install the shiplap vaulted ceiling.
Whether you want to install a shiplap ceiling bathroom or one in other rooms, this paneling design is just right.
The wonderful pattern and texture offered by shiplap boards will make your ceiling appear more fascinating than ever before.
Therefore, do not hesitate to try a shiplap ceiling and experience how it becomes a favorite element added to the house. Happy decorating!